Estimate of my rwhp/torque
Thread Starter
Teching In
Joined: Oct 2017
Posts: 47
Likes: 1
Estimate of my rwhp/torque hey guys so in a few weeks I’m gonna be adding some heads to my lq9. anyone with similar mods can you let me know your build and numbers please?
Current mods are fresh bored .30 over lq9 with flat top pistons. 230/236 113 cam, ls1 intake, stock injectors, built 4 speed with 3200 circle d stall. 1 3/4 headers into y pipe and flowmaster cat back with electric cutout. Tuned. 93 pump gas. I will be adding trick flow 220 heads with 59 combustion chamber and 42lb injectors with a Ls6 intake. Any estimates of my future rwhp/torque? Only goal is 450/420.
Current mods are fresh bored .30 over lq9 with flat top pistons. 230/236 113 cam, ls1 intake, stock injectors, built 4 speed with 3200 circle d stall. 1 3/4 headers into y pipe and flowmaster cat back with electric cutout. Tuned. 93 pump gas. I will be adding trick flow 220 heads with 59 combustion chamber and 42lb injectors with a Ls6 intake. Any estimates of my future rwhp/torque? Only goal is 450/420.
1 3/4 and ls6 intake gonna hold you back about 30whp.
other than that 450whp with mild build h/c 6.0 should be cake. I made 451whp/423wtq with a bolt on ls6 through a 9". So it shouldn't be to hard with a larger engine with h/c.
other than that 450whp with mild build h/c 6.0 should be cake. I made 451whp/423wtq with a bolt on ls6 through a 9". So it shouldn't be to hard with a larger engine with h/c.
Thread Starter
Teching In
Joined: Oct 2017
Posts: 47
Likes: 1
