LS2 Dorman; Coolant tubes and TB.
#1
Teching In
Thread Starter
LS2 Dorman; Coolant tubes and TB.
Starting to assemble my motor back up and have come to a road block or two.. I’m running the ls6 valley cover with this dorman. Really don’t wanna block off the rear two steam vents.. so can I cut the crossover between the two and run a braided line to connect them? Anyone have experience doing this?
Also struggling to find a plug and play throttle body. Looking to spend the Holley sniper efi money on one.. 180$ish. Some say they need throttle cable brackets and some say it needs a longer IAT and what not. Any insight would be wonderful as I need the TB soon so I can get it port matched when I get the intake cleaned up.
Also struggling to find a plug and play throttle body. Looking to spend the Holley sniper efi money on one.. 180$ish. Some say they need throttle cable brackets and some say it needs a longer IAT and what not. Any insight would be wonderful as I need the TB soon so I can get it port matched when I get the intake cleaned up.
#2
TECH Senior Member
Plumb the rear steam vents any way that won't leak. It ain't rocket science....