Belt Length/Part number
Thread Starter
Teching In
Joined: Jul 2020
Posts: 4
Likes: 0
Belt Length/Part number I hate to be the guy to ask this question but after some research I couldn't find anything. I have a Gen 3 6.0 with a low mount alternator, no AC, and ICT Billet power steering delete pulley. Stock sized trunk crank pulley and stock water pump.
Does anyone know the belt length or part number for the belt I need? Just trying to save a trip to my buddies garage and stop at the parts store on the way there.
Thanks.
Does anyone know the belt length or part number for the belt I need? Just trying to save a trip to my buddies garage and stop at the parts store on the way there.
Thanks.
TECH Fanatic
Joined: Jan 2018
Posts: 1,250
Likes: 239
From: Dade City, Fl.
I have used string before, but i have found taking an old serpentine belt and cutting it works better and is more accurate. I "prop" the tensioner about the mid tensioning position and then route the belt. Make a mark on the belt. Measure and look up belt lengths with the corresponding number of ribs. Some belts are advertised inside or working length some are advertised outside length. I hope this can help
TECH Senior Member
Joined: Jun 2016
Posts: 22,293
Likes: 3,617
From: Central Cal.
I have used string before, but i have found taking an old serpentine belt and cutting it works better and is more accurate. I "prop" the tensioner about the mid tensioning position and then route the belt. Make a mark on the belt. Measure and look up belt lengths with the corresponding number of ribs. Some belts are advertised inside or working length some are advertised outside length. I hope this can help
TECH Fanatic
Joined: Jan 2018
Posts: 1,250
Likes: 239
From: Dade City, Fl.
