Limited $$: Which bolt-on?
Thread Starter
TECH Resident
iTrader: (4)
Joined: Jun 2004
Posts: 970
Likes: 0
From: Dallas/CS/Nacogdoches
Limited $$: Which bolt-on? Long story short I have just a limited amount of cash left to do one more minor little bolt-on mod. Which do I go with?
1. SLP smooth air bellow for $35
2. S2 Throttle body for $100 + my stock TB
Let me mention that my car is an M6 TR 224 cam with stock 241 heads, ls6 intake, MAC midlength headers with ORY. I have an MMT lid with K&N filter as well. What will give me the best bang for the buck?
Need some Help guys Post up with help of any kind of feedback from experience with these mods
1. SLP smooth air bellow for $35
2. S2 Throttle body for $100 + my stock TB
Let me mention that my car is an M6 TR 224 cam with stock 241 heads, ls6 intake, MAC midlength headers with ORY. I have an MMT lid with K&N filter as well. What will give me the best bang for the buck?
Need some Help guys Post up with help of any kind of feedback from experience with these mods
TECH Senior Member
Joined: Mar 2004
Posts: 14,620
Likes: 17
From: BFE
TB gets my vote. You can make your own bellows from HOME DEPOT stuff.
You could also port your own TB if you do some research and get you hands dirty.
A couple of links if you decide so
https://ls1tech.com/forums/generation-iii-external-engine/194694-port-tb-without-epoxy-fill.html
http://www.cardomain.com/memberpage/296918/6
You could also port your own TB if you do some research and get you hands dirty.
A couple of links if you decide so
https://ls1tech.com/forums/generation-iii-external-engine/194694-port-tb-without-epoxy-fill.html
http://www.cardomain.com/memberpage/296918/6
Last edited by PREDATOR-Z; Jul 29, 2004 at 05:10 AM.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Thread Starter
TECH Resident
iTrader: (4)
Joined: Jun 2004
Posts: 970
Likes: 0
From: Dallas/CS/Nacogdoches
I've got an underdrive ASP crank pulley and also have all the bolt-on suspension mods as well i.e LCA's Subframes, PR I also have a set of Nitto's if I want to throw them on.
Does anyone know the diameter of the S2 TB?
Does anyone know the diameter of the S2 TB?
On The Tree
Joined: May 2004
Posts: 160
Likes: 0
From: Richmond
Get a cutout and a short throw shifter.My last dyno was 16.2 horse power down and I directly relate it to a poorly fitting non SLP smooth bellows that doesnt fit and keeps coming off and sucking air.
Last edited by tump; Jul 29, 2004 at 06:17 PM.
Originally Posted by jrp
@ smoothbellow for 35. get the fernco/baker hose deal for 15 bucks. the smooth bellows is strictly an appearance mod, get the ported TB, its good for 8-12rwhp.
TECH Enthusiast
Joined: Apr 2004
Posts: 577
Likes: 0
for 100 bucks there is not much you can do to see the hps. Most of those mods are cars with cams and new heads, and you will see 10 hps out of something like a TB. Save up for a new exhaust, headers or a cam. Good luck
