oil temp and tranny temp guage install????
 

Did a search but couldn't find anything on were to install the senders for both of these guages! :eek2:

I'm guessing its an A4?

Here is the writeup i used when i did my tranny temp gauge install. There is an area on the driver's side of the transmission where you can put the sender.

http://www.black98.cz28.com/photo6.html

Thanks how about the the Oil!

Not sure about the oil, but the tranny temp goes into the drain plug in the tranny. I'd assume you can put the oil one into the drain plug too. Thats what I would do.

No one has this guage!?!

Just put it in the drain plug. Done!

I removed the oil level sensor and used that port in the pan for engine oil temps.

It's a 20mm x 1.5 pitch thread

Try this

WWW.XSE.com/leres/ss