ASP Pulley?

Reply Subscribe

Thread Tools

Search this Thread

08-04-2004, 07:32 PM

02WS6#519

On The Tree

Thread Starter

Join Date: Jan 2004

Location: El Paso, Texas, USA

Posts: 199

Likes: 0

Received 0 Likes on 0 Posts

ASP Pulley?

I was removing my front sway today an noticed a problem on my ASP pulley. There is a round plate on the front of the pulley that has "Auto Specialties Performance" etched on it. It is held in place by three welds to the pulley. Well, I noticed that it is coming apart from the pulley itself. It has worked its way loose from one of the welds and is falling off. So it seems. I am afraid that it is going to fall off while I am driving and cause some serious damage. Should I take the plate off before it is too late? Or should I weld it back in place? Is it there for a reason? Please let me know what you guys think before it is too late. Asap!

Thanks
Ever

Last edited by 02WS6#519; 08-04-2004 at 07:40 PM.

Reply Like

08-04-2004, 07:38 PM

02WS6#519

On The Tree

Thread Starter

Join Date: Jan 2004

Location: El Paso, Texas, USA

Posts: 199

Likes: 0

Received 0 Likes on 0 Posts

Here is a pic of the pulley-------->It might be held on by welds on 4 spots instead of 3, not totally sure.

Peace
Ever

Reply Like

08-04-2004, 08:06 PM

Ferocity02

TECH Senior Member

iTrader: (60)

Join Date: Apr 2003

Posts: 9,397

Likes: 0

Received 2 Likes on 2 Posts

I would contact ASP and see about getting a replacement. I would not weld it on myself, it could cause it to become unbalanced, and cause more damage than good.