header and cam question
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
header and cam question take a look at my current mods and my wish list in my signature. is it a must to have headers beforre the cam. thanks
Doug
Doug
hmmm
Originally Posted by 00ls1
T.t.t.
Tyler
Originally Posted by SLVRZLS1
Do all the bolt ons first, that is a big cam, that will not perform to potential without them, don't even think about a cam until you do them. engines works as a system.
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
Originally Posted by SLVRZLS1
Do all the bolt ons first, that is a big cam, that will not perform to potential without them, don't even think about a cam until you do them. engines works as a system.
TECH Enthusiast
Joined: Mar 2004
Posts: 508
Likes: 0
From: Bloomfield, NM
you dont have to have the headers, but you are definitely not going to be getting all you can from a cam without them. i put my cam in a couple days before my headers went on, and there honestly wasnt much of a sotp difference, just a lopier idle. headers went on a day later and omfg, it was a different car. somwthing to keep in mind.
Trending Topics
TECH Enthusiast
Joined: Mar 2004
Posts: 508
Likes: 0
From: Bloomfield, NM
is my list in my signature a pretty good list though for the parts needed, besides a gear?
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
yes, headers are an absolute must with that cam , the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.
and keep your stock Maf.
, the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.and keep your stock Maf.
11 Second Club
Joined: Aug 2004
Posts: 254
Likes: 0
From: Liberty SC
Originally Posted by jrp
yes, headers are an absolute must with that cam , the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.
and keep your stock Maf.
, the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.and keep your stock Maf.
^^^^^^^
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
Originally Posted by jrp
yes, headers are an absolute must with that cam , the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.
and keep your stock Maf.
, the T-rex is a huge cam and needs to breath. no offense but if you have to ask this kind of question are you sure the t-rex is the right cam for you.and keep your stock Maf.
i was talking to a guy and he said that the stock manifolds flowed pretty good so i just thought i would ask
Originally Posted by 00ls1
i was talking to a guy and he said that the stock manifolds flowed pretty good so i just thought i would ask
get your bolt-ons
Originally Posted by 00ls1
no, he owns a chevy TPI vette. he seems to know what he is talking about most of the time
Cam should be one of the last things you do
Thread Starter
Possible Scammer - Buyer Beware - Issues Unresolved
iTrader: (8)
Joined: Apr 2004
Posts: 582
Likes: 0
Originally Posted by ty_ty13
Im currently almost to the end of doing most of my bolt-ons i just ordered my asp pulley but i plan on getting ported TB and 160 stat, im looking into a fast intake for some nos. but then after i get all my "easy mods" then im gonna get the ol "lumpy stick" and mabey some after market heads...haven't made up my mind if i wanna port and polish my stock ones or not....
Cam should be one of the last things you do
Cam should be one of the last things you do
