Cutout install cost
Thread Starter
Staging Lane
Joined: Nov 2003
Posts: 79
Likes: 0
From: Andrews AFB, MD
Cutout install cost I have a SLP Dual/Dual and it's too quiet. I'm pretty sure I just want to put a cutout on it and leave it at that. I don't mind it being loud most of the time, so I'm just doing a manual cutout, no electrics. How much would it cost to get a 3 inch cutout installed in the I pipe and where should I have it done (Meineke, Midas, speed shop)? Any opinions and personal experiences would be great. And yes, I already did a search for this. Thanks.
12 Second Club
Joined: May 2002
Posts: 262
Likes: 1
From: Holiday, Fl.
I had mine installed a few weeks ago at a local muffler shop for $50 also. the guy was very hesitant to touch it at first, mainly because I have LT's/ORY. I just talked to the guy for awhile and convinced him that the cutout was'nt anywhere near where the cats were(and slipped him a $20). Since you still have cats, they shouldn't have a prob. doing it. Just be sure to say "It's for the track only". 
BTW, I LOVE my QTEC-best of both worlds with a flick of a switch
BTW, I LOVE my QTEC-best of both worlds with a flick of a switch
Originally Posted by SStillSSmokin
BTW, I LOVE my QTEC-best of both worlds with a flick of a switch
I would definitely do the QTP electric cut out as well, it is just SO much more convenient and it is quite simple to install and use, and they're coming out with a stainless steel cut out soon as well, VERY trick.
www.quicktimeperformance.com
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Local exhaust shop did mine for 15 bucks. I just called around to the exhaust shops and asked how much it would be to weld in a cutout.. didnt take him more than 15 minutes to do it.
TECH Senior Member
iTrader: (1)
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Originally Posted by LS1LT1
I would definitely do the QTP electric cut out as well, it is just SO much more convenient and it is quite simple to install and use, and they're coming out with a stainless steel cut out soon as well, VERY trick.
www.quicktimeperformance.com
They are illegal everywhere really. LOVE MY QTEC. 
oh ya..about 60 bucks american. Last edited by NHRAMAN; Apr 15, 2006 at 06:44 PM.
u got ripped