QTP long tubes????
Thread Starter
TECH Fanatic
Joined: May 2004
Posts: 1,030
Likes: 0
From: Wichita KS
QTP long tubes???? I hear mostly positive remarks about the quality and fitment of QTP longtubes. I have decided to pay extra and go for these. Is this a good choice. Has anyone ever had a real bad experience with these headers, or are they a great product?
Any info and opinions concerning these headers are welcome!
thanks in advance
Any info and opinions concerning these headers are welcome!
thanks in advance
If I were to do it all over again I would purchase Stainless Steel Works LTs. They use the highest quality steel, period. I have only read a couple of fitment issue threads concerning QTPs. Generally, guys who have them speak highly of them, but I wouldn't trade my SLP LT's for them. But... I don't have clearance issues like some guys, either. Good Luck.
!LS1 11 Second Club
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
QTP: Great product, great quality, great fit, great install (the LT's slide right in). Great all-around. Y-pipe is not so great in terms of install ease, but it should flow better than anything out there (save for the similar mufflex Y-pipe), due to its Flowmaster 4" Scavenger Collector.
I went from SLP LT's to QTP HVM LT's.
I went from SLP LT's to QTP HVM LT's.
i am with everyone eles, i would never buy any other header then QTP's, Great customer service(Barry told me everythign i needed to know before install), great product, and fitment is perfect took me less then 3 hrs to put in. QTP #1 
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by natronathon
Is this a good choice.
Has anyone ever had a real bad experience with these headers,
or are they a great product?
Has anyone ever had a real bad experience with these headers,
or are they a great product?
NO.
YES.
Best LS1 long tube header available IMO, and I MUST disagree with some of the comments above about the Y pipe (but NOT the one about it being the best flowing, that IS true!), it does take some working it (it's multi piece design actually allows it to have a FAR better fit (and flow obviously) than other typical two piece Y pipes) to get it just right but once you do it is a PERFECT fit with the right amount of body AND ground clearances, I absolutely LOVE my QTP set up.
Get the QTP cut out too, it rocks.
TECH Regular
Joined: Jan 2003
Posts: 451
Likes: 0
From: Alabamastan
You will not be disappointed. QTP headers are one of the only products on this board that I have not seen any negative feedback on. Some complain about the Ypipe, but work fine for me and my installer. He even commented on how good QTPs fit after the install. Combined with the GMMG exhaust they are bad a$$.
11 Second Club
Joined: Oct 2002
Posts: 1,400
Likes: 0
From: NY,CT & MA
i got the QTPs.. i am really happy with them....
they are really good stuff...I had a set of other headers before and they rusted in a few months...
i went w/ the QTPs because they have a really good rep, they are stainless and dont rust, they have a true merge on the y pipe for more power
, HVM(high velocity merges) options for the ultimate race header, the QTEC cutout a nice touch to finalize the setup...
i really like them.. can you tell???
they are really good stuff...I had a set of other headers before and they rusted in a few months...
i went w/ the QTPs because they have a really good rep, they are stainless and dont rust, they have a true merge on the y pipe for more power
, HVM(high velocity merges) options for the ultimate race header, the QTEC cutout a nice touch to finalize the setup...i really like them.. can you tell???
Teching In
Joined: Apr 2004
Posts: 39
Likes: 0
i have had my QTP headers for about 6 months or so. they look even better now than the first day i got them.. they have a nice goldish tone to them..
My dad helped me with the install and we got it all done in a few hours. For my first time installing headers i gotta tell you.. it was easy and they went right in.
My dad helped me with the install and we got it all done in a few hours. For my first time installing headers i gotta tell you.. it was easy and they went right in.
Originally Posted by Durien
i got the QTPs.. i am really happy with them....
they are really good stuff...I had a set of other headers before and they rusted in a few months...
i went w/ the QTPs because they have a really good rep, they are stainless and dont rust, they have a true merge on the y pipe for more power , HVM(high velocity merges) options for the ultimate race header, the QTEC cutout a nice touch to finalize the setup...
i really like them.. can you tell???
they are really good stuff...I had a set of other headers before and they rusted in a few months...
i went w/ the QTPs because they have a really good rep, they are stainless and dont rust, they have a true merge on the y pipe for more power
, HVM(high velocity merges) options for the ultimate race header, the QTEC cutout a nice touch to finalize the setup...i really like them.. can you tell???
Mine fit perfect, which is more than I can say for any other header I have ever seen. My y-pipe fite very well too. I am sure it does not hang any lower than the factory one.
If I were to change anything, I think the placement of the left cat could be further forward so it is not so low.
Great product and service!!
I can't wait till spring to drive!!!
If I were to change anything, I think the placement of the left cat could be further forward so it is not so low.
Great product and service!!
I can't wait till spring to drive!!!
