Anyone remove support tube from Volant?
#1
Teching In
Thread Starter
Join Date: Oct 2003
Location: Wichita, Kansas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Anyone remove support tube from Volant?
I'm talking about the support molded into the filter end of the intake. I suppose they engineered it there for strenth, but have any of you guys cut ot out? It wouldn't be any problem to seal the two holes, but would it be possible to get a good seal at the filter without the thing collapsing?
It seems to me that it could disrupt/restrict the airflow an awful lot and needs to go.
Thoughts????
It seems to me that it could disrupt/restrict the airflow an awful lot and needs to go.
Thoughts????
Last edited by Ron78Z&01SS; 02-16-2005 at 01:30 PM.
#3
Staging Lane
Join Date: Dec 2003
Location: Nortern Idaho
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Ron78Z&01SS
I'm talking about the support molded into the filter end of the intake. I suppose they engineered it there for strenth, but have any of you guys cut ot out? It wouldn't be any problem to seal the two holes, but would it be possible to get a good seal at the filter without the thing collapsing?
It seems to me that it could disrupt/restrict the airflow an awful lot and needs to go.
Thoughts????
It seems to me that it could disrupt/restrict the airflow an awful lot and needs to go.
Thoughts????
brace in front of the filter. Guess what? The intake got warm and the in-
take got soft and quit sealing when you tightened up the clamp around the
filter. Volant sent the NEW intake no problems asked. Just glad I found the
problem before engine damage.
I wasn't the first person to call about the sealing problem and Volant sent
me a new part in a couple days.
#4
11 Second Club
iTrader: (5)
Originally Posted by jbuckweiser
I have a Volant on my 02 SS. The original ones didn't have the plastic
brace in front of the filter. Guess what? The intake got warm and the in-
take got soft and quit sealing when you tightened up the clamp around the
filter. Volant sent the NEW intake no problems asked. Just glad I found the
problem before engine damage.
I wasn't the first person to call about the sealing problem and Volant sent
me a new part in a couple days.
brace in front of the filter. Guess what? The intake got warm and the in-
take got soft and quit sealing when you tightened up the clamp around the
filter. Volant sent the NEW intake no problems asked. Just glad I found the
problem before engine damage.
I wasn't the first person to call about the sealing problem and Volant sent
me a new part in a couple days.
I guess that means don't remove it
#5
Teching In
Thread Starter
Join Date: Oct 2003
Location: Wichita, Kansas
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jbuckweiser
The original ones didn't have the plastic
brace in front of the filter. Guess what? The intake got warm and the in-
take got soft and quit sealing when you tightened up the clamp around the
filter.
brace in front of the filter. Guess what? The intake got warm and the in-
take got soft and quit sealing when you tightened up the clamp around the
filter.