Horsepower with this setup?
Thread Starter
TECH Resident
Joined: Dec 2002
Posts: 805
Likes: 0
From: Deer Park, Tx
Horsepower???? I have a manily stock 99 Trans Am A4, if i was to have a MTI lid, flowtech cutout, hypertech programmer, a 3.73 gear, and all the free mods to the intake. how much horse power could be estimated and what would i run down the 1/4?
TECH Senior Member
Joined: Nov 2001
Posts: 7,036
Likes: 1
From: Lake Zurich, IL
Re: Horsepower???? what are you running now? all the freebies plus lid filter etc... maybe take .2-.4 seconds off? Depends on traction too though and what you're running now.
the HPP3 would help with the gear swap to correct the speedo but that's about it... the power tuning may help but it can also hurt, seems to be hit or miss with it.
On my car when I had boltons on a stock tire , stock converter, w/lightweight driver mod it was running 12.85s @ high 108.xx and making 308/318 at the rear wheels. so you could prolly be somewhere around there traction permitting.
the HPP3 would help with the gear swap to correct the speedo but that's about it... the power tuning may help but it can also hurt, seems to be hit or miss with it.
On my car when I had boltons on a stock tire , stock converter, w/lightweight driver mod it was running 12.85s @ high 108.xx and making 308/318 at the rear wheels. so you could prolly be somewhere around there traction permitting.
