gians from TB
03-13-2005, 11:26 AM
#2
Arizona Speed and Marine makes good TB's. I wouldn't go bigger TB till you are making more HP around 395 RWHP. Most people get a new TB with new heads/cam or nitrous and forced induction applications. Any one of the sponors should carry TB's. 58mm seems pretty popular as an upgrade to heads/cam.
03-13-2005, 01:10 PM
#3
SSU's Drunk Typing Whore
iTrader: (47)
Join Date: Jan 2004
Posts: 4,609
Likes: 0
Received 0 Likes
on
0 Posts
Your best bet is to get it ported, do it yourself, or just give it to Jantzer. He does a really good job on them. Might want to do a seach on him though, some people have had some problems with him. Other than that Jantzer is the best, I was really satisfied with him work. With your mods your definitly going to see a nice gain, iam guessing 10 plus hp.
03-13-2005, 02:34 PM
#4
TECH Addict
iTrader: (17)
Join Date: Dec 2002
Location: Hanover, MD
Posts: 2,190
Likes: 0
Received 0 Likes
on
0 Posts
Definetely go with Jantzer if you want to gain some HP and wait 6 months to gain it. Otherwise check out MTI billet throttlebody. Good looks and good gains.
Bryan
parbreak
Bryan
parbreak
03-13-2005, 03:00 PM
#5
Launching!
Join Date: May 2004
Location: miami
Posts: 275
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by blind527
Arizona Speed and Marine makes good TB's. I wouldn't go bigger TB till you are making more HP around 395 RWHP. Most people get a new TB with new heads/cam or nitrous and forced induction applications. Any one of the sponors should carry TB's. 58mm seems pretty popular as an upgrade to heads/cam.
03-13-2005, 03:23 PM
#6
Originally Posted by nspr8td lt1
this is a ls1 not a lt1. a 58mm t/b would choke a ls1. lt1's as you know have a twin bore. and even on lt1's a 52mm is more than enough.
Yeah I noticed that, I keep thinking everyone has an LT1
my bad.