Gmmg
Thread Starter
On The Tree
iTrader: (1)
Joined: Jan 2005
Posts: 102
Likes: 0
From: Corpus Christi, Texas
Gmmg Thinking of buying the GMMG exhaust and my question is right now I have just a flowmaster crossflow muffler(not catback) on the car, how much louder or quieter would the GMMG be compared to the flowmaster? Will there be more drone/rasp than the flows? And how much power do you think I will gain over the flowmaster? thanks
Thread Starter
On The Tree
iTrader: (1)
Joined: Jan 2005
Posts: 102
Likes: 0
From: Corpus Christi, Texas
nobody knows? Somebody has had to have heard them both. I checked out LS1sounds, and it sounded like the GMMG might be a little louder. But I rather have the opinion of people who have heard it in person than go off of a video.
TECH Resident
Joined: Nov 2002
Posts: 857
Likes: 0
From: Orlando
GMMG will be louder. I've run Flowmaster, Dynomax and now GMMG w/o cats. Hands down, more noise. If you're using an ORP, there will be some rasp around 2200. It's to be expected with any non dual exhaust setup and an ORP. Depending on how good your system flows now, you may not gain much. I didn't gain any over my Dynomax muffler but boy does it sound good!!
TECH Fanatic
Joined: Nov 2001
Posts: 1,098
Likes: 0
From: I-L-L-I-N-O-I-S
I've always liked Flowmasters tone at idle and on acceleration on stockish cars...But to answer your question, I've heard Flowmaster many times on LT1's & LS1's and currently have the GMMG on both motors. 
They're both kinda quiet at idle, sound similar down low, but the GMMG is a lot louder and has a MUCH better tone when you get on the car! GMMG @ WOT has a super deep, yet clean/refined sound. And with headers + highflow cats, it =
And going from a Flowmaster muffler only to the full 3" GMMG cat-back, expect to gain around 10-12rwhp on your car...
GREAT choice in exhaust BTW,
Mike
They're both kinda quiet at idle, sound similar down low, but the GMMG is a lot louder and has a MUCH better tone when you get on the car! GMMG @ WOT has a super deep, yet clean/refined sound. And with headers + highflow cats, it =
And going from a Flowmaster muffler only to the full 3" GMMG cat-back, expect to gain around 10-12rwhp on your car...
GREAT choice in exhaust BTW,
Mike
Trending Topics
Originally Posted by Hardtop00SS
GMMG is a 100x better then the blowmaster. GMMG will be a little louder, little more drone, and a hell of a better sound! GMMG all the way!!!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Joined: Nov 2003
Posts: 6,216
Likes: 236
From: Wichita KS / Rancho San Diego
I went from some kind of Flowmaster knock-off that was on the car when I bought it to a GMMG and was extremely pleased. I could feel the difference in torque. Quiet at idle and cruise, but deeper; louder with more throttle - awesome at WOT. It's noticeably louder - and I was thinking too loud - with the increased revs of my new TC, but I've adjusted. All around great sound, but you are going to have to turn up your sound system.
Thread Starter
On The Tree
iTrader: (1)
Joined: Jan 2005
Posts: 102
Likes: 0
From: Corpus Christi, Texas
I think I am just going to go ahead and get the gmmg and if it does sound to loud to me when I get my kook or qtps then I will just through a bullet in the I pipe and see what happens.
Another question: My TA is black do you think it will look good if I polish the gmmg before it is installed.
Another question: My TA is black do you think it will look good if I polish the gmmg before it is installed.
Originally Posted by blackbird007
I think I am just going to go ahead and get the gmmg and if it does sound to loud to me when I get my kook or qtps then I will just through a bullet in the I pipe and see what happens.
Another question: My TA is black do you think it will look good if I polish the gmmg before it is installed.
Another question: My TA is black do you think it will look good if I polish the gmmg before it is installed.
