My True Duals Under the Axle
looks good ... do you have to unbolt the tailpipes to jack your car up and let the axle drop down? Looks good, by the look of the bends, its less restrictive than the over the axle just because of the angles. I bet you don't lose too much hp from that setup over the dumps.
Thread Starter
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY
Originally Posted by rainman
Definitely needs some tips. What kind are you thinking about getting?
Hardtop00SS- I had my stock heads ported at the same time so it isn't really a fair comparison. The exhaust is much lounder now but I'm sure it isn't as loud as it would have been dumped.
FstBlkz28- No, the car was on a lift in the first 4 pics. It clears the axle just fine, something I am estatic about. The HP loss was negligable if any. There's really only two extra mandrel bends on the end so it really doesn't affect the flow much.
Thanks for all the compliments guys. If any of you KY/OH/IN people are interested in having this guy make you a set of duals you can call Force Fed High Performance and they can hook you up.
Thread Starter
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY
Originally Posted by Jeff2002WS6
Where in Indiana did you get that done? I may need to go and check that place out myself 
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Thread Starter
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY
With the new setup I went 12.47 @ 116mph with a 2.0 60' on street tires. The system performs well and I got a lot of compliments on how it sounds. I'll update with the requested pics as soon as I get a chance.
Thread Starter
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY
For those of you who wanted a video of this exhaust, I got a nice one Friday night while I was racing.
This is the best quality video as far as sound goes, it was the first run of the night.
http://videos.kentuckymustangs.com/somerset/Dave127.wmv
This was my 12.4 run. I was running next to an open-headers LS1 so it's kind of hard to distinguish between the two cars.
http://videos.kentuckymustangs.com/somerset/Dave124.wmv
Enjoy!
00Z28 Camaro- It's not really a fair comparison, the 12.34 was on drag slicks and the car was bolt-ons only. My car has an F15 cam and ported stock heads now so beating that 12.34 is no problem now. Heck, I almost did it on street tires Friday night lol.
This is the best quality video as far as sound goes, it was the first run of the night.
http://videos.kentuckymustangs.com/somerset/Dave127.wmv
This was my 12.4 run. I was running next to an open-headers LS1 so it's kind of hard to distinguish between the two cars.
http://videos.kentuckymustangs.com/somerset/Dave124.wmv
Enjoy!
00Z28 Camaro- It's not really a fair comparison, the 12.34 was on drag slicks and the car was bolt-ons only. My car has an F15 cam and ported stock heads now so beating that 12.34 is no problem now. Heck, I almost did it on street tires Friday night lol.
Staging Lane
Joined: Sep 2004
Posts: 64
Likes: 0
From: Anderson, IN
Originally Posted by LS1Maniac
You'll have to call Force Fed High Performance and ask Brad. They took care of all of that for me.
Thread Starter
TECH Regular
Joined: Apr 2003
Posts: 446
Likes: 0
From: Lexington, KY