Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories

Sponsored by:

lid question

Reply Subscribe

Search this Thread

Old

Aug 9, 2005 | 09:54 AM

#1

Thread Starter

TECH Regular

Joined: Nov 2003

Posts: 463

Likes: 0

From: va baby!

Question

lid question

what is the best way to block the hole in my slp lid when i remove the A.I.R.?

Old

Aug 9, 2005 | 10:21 AM

#2

TECH Regular

iTrader: (1)

Joined: Dec 2004

Posts: 479

Likes: 0

From: Philly

Default

a plug obviously!!

had to do it...i want to know also.

Old

Aug 9, 2005 | 10:24 AM

#3

TECH Senior Member

iTrader: (5)

Joined: May 2004

Posts: 6,492

Likes: 6

From: Back in the Burg

Default

Go to a hardware store and get a plastic plug, they should have many sizes. They are used for pluging hydraulic lines when you disconect them so all the oil doesn't leak out of the system. Leave the rubber gromet in the lid and rtv the plug in. That what i did

Old

Aug 9, 2005 | 11:00 AM

#4

Teching In

Joined: May 2005

Posts: 26

Likes: 0

From: New Orleans

Default

_buy the plug and while ur at it u might need to put a fliter on the smog hose if u had to disconnect that from the old lid

Old

Aug 9, 2005 | 07:50 PM

#5

12 Second Club

iTrader: (1)

Joined: Sep 2003

Posts: 176

Likes: 0

From: Cedar Park, TX

Default

I used a PVC end cap on mine and just painted it black. Left the grommet in there and it worked like a charm.

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 09:55 AM.