Replacement clamps - FLP headers
#1
TECH Veteran
Thread Starter
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
Replacement clamps - FLP headers
My header clamps for my FLP long tube headers are going south... There are the RING-type clamps that are made of stainless....
Where can I buy replacement clamps - there are two large clamps 3" and two medium clapms 2. 3/4 inces I think.....??
Anyway I beleive these are very expensive. ANy thoughts on cost effecient replacements?
Thanks
Where can I buy replacement clamps - there are two large clamps 3" and two medium clapms 2. 3/4 inces I think.....??
Anyway I beleive these are very expensive. ANy thoughts on cost effecient replacements?
Thanks
#2
TECH Fanatic
iTrader: (6)
Join Date: Nov 2001
Location: NV
Posts: 1,224
Likes: 0
Received 0 Likes
on
0 Posts
If you have any big rig places or truck stops in your area.They usaully stock the band clamps.Here locally they're $4 to $5 a piece.If not Jegs and Summit sell them as well as alot of the sponsers over there ----------------------->>>>>>>>>>>>>>>.
#3
10 Second Club
iTrader: (3)
Join Date: Dec 2001
Location: St. Charles, MO
Posts: 528
Likes: 0
Received 0 Likes
on
0 Posts
The ring type clamps you are talking about are called v-band clamps. Check with a turbo kit manufacturer; tell them you need just the clamp, not the discs.
Pro turbo kits has them, or you can get them from FLP
Pro turbo kits has them, or you can get them from FLP
#4
TECH Veteran
Thread Starter
Join Date: Aug 2002
Location: Hartsdale, NY
Posts: 4,055
Likes: 0
Received 0 Likes
on
0 Posts
OK Jegs sells them for $49 a piece complete with new disks...
FLP - sell them for $23 for 2.5 inch and $25 for the 3 inch...
The truck repair shop in my area is never open on saturday/sunday....
FLP - sell them for $23 for 2.5 inch and $25 for the 3 inch...
The truck repair shop in my area is never open on saturday/sunday....