building your own mufflers.
Thread Starter
On The Tree
Joined: Jul 2005
Posts: 111
Likes: 0
From: Houston TEXAS
building your own mufflers. Anyone here attempted this.
Anyone got any dimensions IE spacing between baffels.
Chamber designs for deep sound and canceling out any highs, I think this would require wave length knowledge.
Where to buy stainless steelwool.
might as well build the mufflers since I've built everything else.
www.geocities.com/ls1chevy2
Anyone got any dimensions IE spacing between baffels.
Chamber designs for deep sound and canceling out any highs, I think this would require wave length knowledge.
Where to buy stainless steelwool.
might as well build the mufflers since I've built everything else.
www.geocities.com/ls1chevy2
TECH Enthusiast
Joined: May 2005
Posts: 555
Likes: 0
From: Blairsville, GA
I'm working on some, but it's more like a trial buildup to go on my dad's truck. If they do good, I'll make a set for the T/A. They're 12" long X 4 1/2" diameter, in 3" from each end is a ring with 12 9/16" holes punched in them. The rings are on the ends of a 6" long 2 1/2" pipe that is hopefully going to be perforated. No packing at all.
I made my own Flowmaster for my Jeep, and it has a V8 sound to it(it's an inline 6) going down the highway.
Now I'd like to know where to get perforated tubing and to have things aluminized... ya got any ideas???
I made my own Flowmaster for my Jeep, and it has a V8 sound to it(it's an inline 6) going down the highway.
Now I'd like to know where to get perforated tubing and to have things aluminized... ya got any ideas???
