Car Chemistry or Dynatec Exhaust Insert Users Inside Please
Car Chemistry or Dynatec Exhaust Insert Users Inside Please I am interested to see how much these type of insterts actually quieted down the exhaust, and if there was any noticable power loss after these were installed.
I will be running a pair of mufflers or bullets right off the collectors and I am hoping these would quiet the car down a bit without sacrificing a lot of power.
Any information or feedback is much appreciated.
Thank you
Ross
I will be running a pair of mufflers or bullets right off the collectors and I am hoping these would quiet the car down a bit without sacrificing a lot of power.
Any information or feedback is much appreciated.
Thank you
Ross
Originally Posted by Ryan02SS
I lost 33rwhp @ 34rwtq running the 3" 2 disk Car Chemistry inserts on a stock headed TR224 cammed LS1. Stay far far away!!!!!!
Keith
Back to back dyno pulls. Only difference was cutout was closed on one run and open on another. It necks your exhaust flow down to 1 1" hole with a few smaller holes in the discs around the main inner tube.
If you don't believe me then pics are worth a thousand words...........
If you don't believe me then pics are worth a thousand words...........
Originally Posted by ls1290
That can not be right. It clearly states on their website that there is no loss of horsepower or torque.
Keith
Keith
as ryan pointed out, a picture is worth a thousand words. i've also seen a few other ABAB test confirming the type of results ryang got.
