I searched and really couldnt get what i wanted , i just want to know who uses which wires and who thinks whats the best so i can get some asap
thanks

 

I have the MSD superconducters and would say they are some of the better wires. They seem to be a pretty popular wire.

 

+1....

 

thanks i need to buy some now to do my first tune up but im on a time limit

 

Taylor Thundervolts are pretty good as well.

 

MSDs here.

 

+1
I have the Taylor 409 wires.

 

I have Taylor Thundervolts on my car. They've been taken off a total of 3 times in the past year for plug changes and header install. Every time I've taken them off, one of them has separated at the plug end (yes, I pulled from the boot as close to the plug as I could get). A friend of mine recently switched to MSD after chasing down some misfire issues and gave me his old set of Thundervolts. The fact that I have spares on hand is the only reason I haven't switched to something else. There are a few people here who have had bad luck with Taylor wires:
https://ls1tech.com/forums/showthrea...ghlight=taylor

 

MSD's here.

 

me too.

 

taylor spiro pro

 

taylor spiro pro here

 

MSD here

 

Just ordered MSD's from Thunder Racing a few min ago.

 

I've got 91K on the orginal stock wires that came on the car with no problems made 404\374 with bolt ons, cam and stock heads through the mufflers..

 

crane fire wires here on the wife's car.

 

Taylor's here, had random misfires with the MSD's. The misfire's only showed up on a scanner, the car seemed fine and I was rather shocked to see them on the scanner. Damn MSD's seperated on me(the connector actually broke, the wire did NOT pull out from the connector). Changed to Taylor's and the misfires went away .

 

MSD's.

Both my buds that ran Taylors had problems with them after spark plug change. The aren't very strong.

 

GM Performance wires here

 

Taylor's here too.