Firstgen with Pacesetters.. Collector to X pipe questions...
Thread Starter
Joined: Aug 2005
Posts: 1,959
Likes: 4
From: The trailer park
Firstgen with Pacesetters.. Collector to X pipe questions... I have a pair of Pacesetter longtubes on my '67 camaro. How do I connect the collectors to the X pipe? I want to run the headers to a pair of 3" cutouts, to a 3" universal X pipe to mufflers. The headers MUST be removable. Do i weld some kind of flange on them? Maybe those 3 bolt triangle ones that SBC headers have? Any help would be appreciated, as well as information where to get the products if possible. Thanks
olly
olly
!LS1 11 Second Club
Joined: Apr 2003
Posts: 7,133
Likes: 2
From: Miami
Cutouts on an X-pipe will be redundant.
Pacesetters are slipfit, so simple band clamps will do the job. If the ends of the X-pipe don't slip over the header collectors, have them expanded at an exhaust shop.
Pacesetters are slipfit, so simple band clamps will do the job. If the ends of the X-pipe don't slip over the header collectors, have them expanded at an exhaust shop.
Thread Starter
Joined: Aug 2005
Posts: 1,959
Likes: 4
From: The trailer park
Okay. I looked at summit.. I think i'm gonna get the 45 or 60 degree 3" elbows and use clamps. I'd not use cutouts for power gains. Just for the loudness factor. 
thanks
olly
thanks
olly
