Header install during head swap?
Header install during head swap? With the heads removed, can Long tubes be installed from the top? If not, anyone know about how high the car will need to be jacked up?
Staging Lane
Joined: Nov 2001
Posts: 77
Likes: 0
From: Phoenix Arizona
Should be able to do that, yes. When I put the SuperMAXX headers in I tried from the top. They wouldn't fit, but it was pretty close. If the heads were out of the way they would have gone it.
I don't know for sure as I haven't had my heads off, but I'm going to say no.
It was a real tight fit from the bottom not to mention from the top. I had
to jack my car up at least 2'.
It was a real tight fit from the bottom not to mention from the top. I had
to jack my car up at least 2'.
I swapped my heads this summer and slid the headers into place before putting the new heads on...much easier than from below. The lower head bolts are a little tight to get to whith the headers in place, still better than doing the headers from below IMHO!
