Spohn TQ ARM with X pipes
Thread Starter
Launching!
Joined: Jun 2003
Posts: 232
Likes: 0
Spohn TQ ARM with X pipes Come on how many of you guys are still running a stock TQ arm
There can not be that many of you left. How do we get around the center body mount TQ arm style.
I am going to hit it tomorrow morning trying to get the summet 3" X pipe kit to work. Who has done it and is there any one willing to throw some info my way.I will post pics as i go to let you all know the progress and what type of bends and stuff i used. I will get it eventually and then i will give all the info i can out.
There can not be that many of you left. How do we get around the center body mount TQ arm style.
I am going to hit it tomorrow morning trying to get the summet 3" X pipe kit to work. Who has done it and is there any one willing to throw some info my way.I will post pics as i go to let you all know the progress and what type of bends and stuff i used. I will get it eventually and then i will give all the info i can out.
Try a search, I know a few people have done it. If you have the torque arm installed, then you can build your exhaust around it (I've seen it done, never with summit's x-pipe kit, but I'm sure a good exhaust guy could do it), but if you build your exhaust THEN try to fit the chassis-mount TA, it will probably not fit.
i know someguy had pics posted - it was pretty sweet.. both tubes came through where the y-pipe would go and exitted on ONE side. the mufflers i believe were staggered so they could run the pipes really close together - i think it was a 3" kit too. really inovative imo.
Thread Starter
Launching!
Joined: Jun 2003
Posts: 232
Likes: 0
Ya i found a pic LANE is the only one who seams to have done it and posted a pic. I can not beleave there are that many people still running the stock style arm the difference was night and day at the track. O well i will have to go at it just the same.
