Dynatech headers
I'm running the supermaxx 1 3/4" torqued stepped to 1 7/8" Coated with coated ORY. Fits good got them in the car in about 6 hours start to finish.
I took off a set of SLP's that I had. They kept scraping speed bumps everywhere.
Just that change alone netted me an solid 2 mph in the 1/8. Possibly from the 1 7/8 over the 1 3/4 since this is a NOS car.
The only problem is the oil filter but thats whit and LT. I can get you pics, if you want.
I took off a set of SLP's that I had. They kept scraping speed bumps everywhere.
Just that change alone netted me an solid 2 mph in the 1/8. Possibly from the 1 7/8 over the 1 3/4 since this is a NOS car.
The only problem is the oil filter but thats whit and LT. I can get you pics, if you want.
dude, your gonna love them!!! I have them on my Z and one of the best buys i have had...
Well, except for the 408ci!!!!
Here is one of the links i found on the headers system, i have a fe posts on dynatech so if you wish, you can search around for those, but this should get you started...
https://ls1tech.com/forums/showthrea...light=dynatech
But IMO, they look, perform, and fit Excellent!!!! People are gonna always recommend Kooks or QTP, but i feel that the dynatechs are equally matched at least!!
Good luck!
Well, except for the 408ci!!!!
Here is one of the links i found on the headers system, i have a fe posts on dynatech so if you wish, you can search around for those, but this should get you started...
https://ls1tech.com/forums/showthrea...light=dynatech
But IMO, they look, perform, and fit Excellent!!!! People are gonna always recommend Kooks or QTP, but i feel that the dynatechs are equally matched at least!!
Good luck!
Joined: Jun 2004
Posts: 1,501
Likes: 7
From: Ft. Irwin, California (But Virginia is home)
Originally Posted by raymondvp45
Any body running that dynatech header system? If so, please let me know you experience(s).
1. quality
2. fit and installation
3. performance
Thank you
1. quality
2. fit and installation
3. performance
Thank you
