Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Instead of duals...

Thread Tools
 
Search this Thread
 
Old 12-24-2005 | 05:37 AM
  #1  
Lss1350's Avatar
Thread Starter
Teching In
 
Joined: Mar 2005
Posts: 44
Likes: 0
From: Pittsburgh
Default Instead of duals...

Current setup is in sig.

I want to toss my exhaust from the headers back, and I was thinking about bolting up some Flowtech purple hornies. Its basically a 32in long, 3inch in/out glasspack with turndowns.

It wouldn't be as wild as running fully open headers, and I think it would sound crazy loud, but would it have a negative effect on performance?

-j
Old 12-24-2005 | 11:18 AM
  #2  
02Z28's Avatar
10 Second Club
iTrader: (11)
 
Joined: Dec 2003
Posts: 795
Likes: 0
From: Joplin, Missouri
Default

Those purple hornies sound like ****! I had them on my nova for a day then I ripped them off.
Old 12-24-2005 | 12:04 PM
  #3  
BlackHawk T/A's Avatar
TECH Addict
iTrader: (3)
 
Joined: Nov 2005
Posts: 2,869
Likes: 0
From: Lincoln, NE
Default

Agreed.
Old 12-24-2005 | 12:20 PM
  #4  
Lithium's Avatar
SSU's Drunk Typing Whore
iTrader: (47)
 
Joined: Jan 2004
Posts: 4,609
Likes: 0
Default

I say Spiral Flows instead. Or just stick with the bullets.
Old 12-24-2005 | 01:43 PM
  #5  
Lss1350's Avatar
Thread Starter
Teching In
 
Joined: Mar 2005
Posts: 44
Likes: 0
From: Pittsburgh
Default

So say I use bullets instead, is a X pipe required to get the best gain? Or can I just have them put on at the end of the headers and turned down?

-j
Old 12-24-2005 | 02:02 PM
  #6  
02Z28's Avatar
10 Second Club
iTrader: (11)
 
Joined: Dec 2003
Posts: 795
Likes: 0
From: Joplin, Missouri
Default

Do an x-pipe and you will pick up a little more power.




All times are GMT -5. The time now is 03:51 PM.