FAST 90 install. HELP!!

Reply Subscribe

Thread Tools

Search this Thread

Dec 30, 2005 | 03:48 PM

just-a-z

Thread Starter

TECH Enthusiast

iTrader: (25)

Joined: Dec 2004

Posts: 592

Likes: 0

From: Houston, TX

FAST 90 install. HELP!!

I have gotten all of the bolts off of my LS6 manifold and lifted the 4 back ones and tried to pull it out a little. I am having no luck and the damn thing will not give. Is there anything else I have to do to get this damn thing off?

Dec 30, 2005 | 04:16 PM

AMMP

Teching In

Joined: Dec 2005

Posts: 4

Likes: 0

From: Crestwood, Ky

There are some tubes connected to the very back of the intake manifold. They are very hard to get to but will have to remove them to get the itake out.

Dec 30, 2005 | 11:42 PM

CRL 01 SS

TECH Enthusiast

iTrader: (4)

Joined: Apr 2002

Posts: 533

Likes: 0

From: Hoover, Alabama

Yeah, there are vacuum lines and a MAP sensor connected to the back of the intake. You'll have remove those lines and unplug the sensor. Be careful removing it so you don't break the vacuum line nipples off of the intake.