ls1 intake to ls6 intake, whats needed?
Thread Starter
12 Second Club
iTrader: (16)
Joined: Jul 2005
Posts: 783
Likes: 0
From: central coast, cali
ls1 intake to ls6 intake, whats needed? im thinking about upgrading my 98 intake to a ls6 intake, but what all is needed? i need your help guys. if i buy the ls6 intake, is it just a direct swap? or do i need other parts so it fits in there?
12 Second Club
iTrader: (11)
Joined: Jan 2005
Posts: 1,191
Likes: 0
From: NC, Charlotte / SC, RockHill
http://www.texas-speed.com/shop/cate...MID=1&catid=12
its a 95% direct swap except for the parts I listed above.
so Thats what all u need.
its a 95% direct swap except for the parts I listed above.
so Thats what all u need.
It's a good idea to do the LS6 PCV conversion, while you have your intake off....& maybe check your knock sensors (since 98s are notorious for false knock)
Are you ditching your EGR? You will need a block off plate & tuning to not trip the SES light.
http://www.ls1howto.com/index.php?article=5
This is a write-up on how to do it, should give you a good idea of everything you need.
Are you ditching your EGR? You will need a block off plate & tuning to not trip the SES light.
http://www.ls1howto.com/index.php?article=5
This is a write-up on how to do it, should give you a good idea of everything you need.
