Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

airlid=problems?

Thread Tools
 
Search this Thread
 
Old Feb 28, 2006 | 05:10 PM
  #1  
who281's Avatar
Thread Starter
TECH Regular
20 Year Member
iTrader: (1)
 
Joined: Feb 2006
Posts: 405
Likes: 0
From: Katy,Texas...
Default airlid=problems?

just got an MTI airlid installed with K&N filter...engine has random misfires exhaust rattles...airlid...bad luck????
Reply
Old Feb 28, 2006 | 05:14 PM
  #2  
00'WS6Rocket's Avatar
TECH Resident
iTrader: (3)
 
Joined: Nov 2004
Posts: 939
Likes: 0
From: Fort Worth, Texas
Default

Don't think the airlid is the culprit, exhaust rattles cause it's either the cat gone bad or maybe the heat shield, but airlid has nothng to do with that. as for the misfire could be a worn spark plug.
Reply
Old Feb 28, 2006 | 05:20 PM
  #3  
Cstick's Avatar
TECH Regular
 
Joined: Sep 2004
Posts: 404
Likes: 0
From: Raleigh, NC
Default

Did this happen right after the install? Make sure you have everything clamped down snug, and you do not have any air leaks. Did you put extra oil on the filter. To much oil on one can let excess find its way to the MAF and fool it to not know how much air is passing it. Probably nothing related to the lid though. Look over everything you did again.
Reply
Old Feb 28, 2006 | 05:27 PM
  #4  
00'WS6Rocket's Avatar
TECH Resident
iTrader: (3)
 
Joined: Nov 2004
Posts: 939
Likes: 0
From: Fort Worth, Texas
Default

Did this happen right after the install?
Good question, also didn't think about the k&n oil.
Reply
Old Feb 28, 2006 | 05:30 PM
  #5  
who281's Avatar
Thread Starter
TECH Regular
20 Year Member
iTrader: (1)
 
Joined: Feb 2006
Posts: 405
Likes: 0
From: Katy,Texas...
Default

it did happened like a day or so after the install like a goiod 36 hours after...but MTI installed it not me...and they are professionals....
Reply
Old Feb 28, 2006 | 06:23 PM
  #6  
FstBlkz28's Avatar
TECH Fanatic
iTrader: (13)
 
Joined: Aug 2002
Posts: 1,222
Likes: 0
From: DFW, TX
Default

Air lid shouldn't cause any problems like that. It's got to be a coincidence ... but check the spark plugs for the misfires and wires (all are truely attatched at both ends). As for the rattle, maybe a heatshield, or cat gone bad (either way, not caused by the lid)
Reply
Old Mar 1, 2006 | 12:13 AM
  #7  
FUN LS1's Avatar
TECH Enthusiast
 
Joined: Jul 2005
Posts: 732
Likes: 0
From: Herndon, VA
Default

Originally Posted by Cstick
Did this happen right after the install? Make sure you have everything clamped down snug, and you do not have any air leaks. Did you put extra oil on the filter. To much oil on one can let excess find its way to the MAF and fool it to not know how much air is passing it. Probably nothing related to the lid though. Look over everything you did again.
I vote for oil on the MAF sensor wire... if nothing else changed. You should NOT have a tuning issue just adding a lid and cai kit, even if you have leaks all over the place.
Reply




All times are GMT -5. The time now is 11:36 AM.

story-0
10 Reasons Daily Driving a Swap Project SUCKS! (& 1 Reason to Do It Anyway)

Slideshow: 10 reasons daily-driving a swap project might not be for you. Or is it?

By Michael S. Palmer | 2026-06-17 09:39:05


VIEW MORE
story-1
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'

Don't get dad new socks or a grill brush this year.

By Brett Foote | 2026-06-09 14:55:56


VIEW MORE
story-2
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?

Slideshow: We take a close look at the ONE and Artidiag 800BT2 diagnostic tools from Topdon and the reasons to buy one over the other.

By Pouria Savadkouei | 2026-06-18 10:26:23


VIEW MORE
story-3
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine

Slideshow: The controversial Ferrari F6 swaps its original flat-12 for a Corvette Z06-derived LT4 V8 and sends power to four rear wheels through a custom-built drivetrain.

By Verdad Gallardo | 2026-05-26 18:23:54


VIEW MORE
story-4
7 Most Reliable High-Performance Engines GM Has Ever Built

Slideshow:These GM engines didn't just make huge power, they survived abuse, boost, track days, and six-digit mileage with a reputation for refusing to quit.

By Verdad Gallardo | 2026-05-21 16:45:27


VIEW MORE
story-5
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin

Slideshow: This heavily modified 1971 Camaro mixes classic muscle car styling with a fifth-generation Camaro interior and modern LS3 power.

By Verdad Gallardo | 2026-05-12 18:06:42


VIEW MORE
story-6
6 Common C5 Corvette Failures and What's Involved In Repairing Them

Slideshow: From wobbling harmonic balancers to failed EBCMs, these are the issues that define long-term C5 ownership and what repairs typically involve.

By Pouria Savadkouei | 2026-05-07 18:44:57


VIEW MORE
story-7
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph

Slideshow: A modern Camaro transformed into a retro icon, this limited-run "Bandit" build blends nostalgia with brute force in a way few revivals manage.

By Verdad Gallardo | 2026-04-21 13:57:02


VIEW MORE
story-8
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked

Slideshow: Cadillac didn't just crash the high-performance luxury vehicle party, it showed up loud, supercharged, and occasionally a little unhinged...

By Pouria Savadkouei | 2026-04-16 10:05:15


VIEW MORE
story-9
Top 10 Most Powerful Chevy Trucks Ever Made!

Slideshow: Top ten most powerful Chevy trucks ever made

By | 2026-03-25 09:22:26


VIEW MORE