when installing headers will I need to weld?
#1
Launching!
Thread Starter
Join Date: Mar 2002
Location: College Park, MD USA
Posts: 226
Likes: 0
Received 0 Likes
on
0 Posts
when installing headers will I need to weld?
ok so I saw that link to the MAC header install guide and it seems so easy just time consuming. I am curious if I will need to do any of the following. If I do I would be less inclined to do it myself:
1) saw any pipes
2) weld any pipes
thanks
1) saw any pipes
2) weld any pipes
thanks
#2
TECH Addict
Join Date: Nov 2001
Location: Nawf Carolina
Posts: 2,556
Likes: 0
Received 0 Likes
on
0 Posts
Re: when installing headers will I need to weld?
Nope, no sawing or welding required. The stock Y pipe is attached with bolts and a clamp, so you just unbolt and unclamp it. Then you clamp and bolt the MAC parts in place.
I did have a small spot weld made on the bottom of where my Y and intermediate pipe connect, just for insurance, but most people just have it clamped together.
J.
I did have a small spot weld made on the bottom of where my Y and intermediate pipe connect, just for insurance, but most people just have it clamped together.
J.