Post pics of your Baker Hose
Thread Starter
Administrator
Joined: Jan 2002
Posts: 45,841
Likes: 5
From: Earth
Post pics of your Baker Hose I'm getting rid of my fernco hose. I don't want to crack my MTI lid (besides it's ugly as hell <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> ).
Two things:
1. Post pics of it, red if possible.
2. Does it have the "rib" around it to prevent "suck in"?
Thanks,
Dan
Two things:
1. Post pics of it, red if possible.
2. Does it have the "rib" around it to prevent "suck in"?
Thanks,
Dan
TECH Fanatic
Joined: Nov 2001
Posts: 1,780
Likes: 7
From: Mi./Al.
Re: Post pics of your Baker Hose To get a correct fit of the Baker hose you need to do a little triming, on the TB end I cut a 1/2" off and on the MAF end you trim at an angle. Here's some pictures that might be of some help, one thing you don't want is to trim too much off.
For some reason I can't get the pics to show up, here's a link to the pics, pages 1 and 2 are probably what you want to look at. http://groups.msn.com/AlsCamaroSSPic...ox.msnw?Page=1
If you need any help with the install please let me know.
Al
<small>[ July 22, 2002, 07:06 PM: Message edited by: DARK AGE 53 ]</small>
For some reason I can't get the pics to show up, here's a link to the pics, pages 1 and 2 are probably what you want to look at. http://groups.msn.com/AlsCamaroSSPic...ox.msnw?Page=1
If you need any help with the install please let me know.
Al
<small>[ July 22, 2002, 07:06 PM: Message edited by: DARK AGE 53 ]</small>
