Need to cange my FLP Y pipe
Need to cange my FLP Y pipe I want to change my FLP y-pipe. It is a little small for me. For all that have already done this, was it worth it. Also did you use the Flowmaster Y to do it? If you have pics that would be great. TIA
12 Second Club
Joined: Feb 2002
Posts: 1,526
Likes: 0
From: Washington State
Re: Need to cange my FLP Y pipe You should run a true dul setup <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" /> . FLPs, into dual bullets per side with cones in the header collector, the straight pipes with turn downs just before the rear axle! <img border="0" title="" alt="[Cool]" src="gr_images/icons/cool.gif" />
!Dial-up Director
Joined: Nov 2001
Posts: 3,100
Likes: 1
From: Louisiana
Re: Need to cange my FLP Y pipe 3" with Flowbastard 3.5" collector on the left
2.5" FLP y-pipe on the right
http://www.fryrice.com/images/ypipe/DCP_0671.JPG
Was worth ~3rwhp on the dyno.
Justin
<small>[ July 06, 2002, 10:25 PM: Message edited by: Jsears8 ]</small>
2.5" FLP y-pipe on the right
http://www.fryrice.com/images/ypipe/DCP_0671.JPG
Was worth ~3rwhp on the dyno.
Justin
<small>[ July 06, 2002, 10:25 PM: Message edited by: Jsears8 ]</small>
