What's that smell??.....After LT/ORP install
Thread Starter
Joined: Nov 2001
Posts: 816
Likes: 2
From: Lake Delton, WI
What's that smell??.....After LT/ORP install I just started smelling all sorts of aromas only at start-up after my LT/ORP install . I know most of it is the unburned hydrocarbons that the cats used to take care of but it seems like I am also smelling some sort of oil at times when I start the car warm only. It goes away quite fast and I have never seen any puffs of smoke and the car doesn't use any oil (it's maybe down 1/8 of a quart in 2000 miles). I just wonder if all these aromas, including the smell of oil, is normal at start-up after a LT/ORP install? I have Jet Hot coated Hooker's & ORP. I just can't seem to figure out where it would be coming from if the car doesn't use oil and if there is no visual sign of burning oil at startup. Maybe there is some oil residue left on the block from removing the oil diverter plate and when I start the car the fans kick on and blow the smell around and maybe that's what I am smelling......?
Thanks
Paul
<small>[ July 22, 2002, 10:01 AM: Message edited by: JR HAWK 9 ]</small>
Thanks
Paul
<small>[ July 22, 2002, 10:01 AM: Message edited by: JR HAWK 9 ]</small>
Launching!
Joined: May 2002
Posts: 287
Likes: 0
From: Evans GA
Re: What's that smell??.....After LT/ORP install I installed my headers saturday and they puffed and smoked after the first start up, then later that day there was a weird smell that was probably some compound in the coating melting off. Did you take off your valve covers during the install? You may have a new leak from them.
