slp y pipe
Thread Starter
Staging Lane
Joined: May 2005
Posts: 72
Likes: 0
From: riverside,ca
slp y pipe hi guys
im working on my new slp headers and y pipe for my trans am,and a problem came on with the y pipe.
i cant connect the y pipe to the headers from the right side because its too short?? one side goes to the left headers and the other is too short.
i just wanna ask is that normal and how do i deal with this problem??
im working on my new slp headers and y pipe for my trans am,and a problem came on with the y pipe.
i cant connect the y pipe to the headers from the right side because its too short?? one side goes to the left headers and the other is too short.
i just wanna ask is that normal and how do i deal with this problem??
Teching In
Joined: Apr 2006
Posts: 4
Likes: 0
From: Raliegh NC
i have slp headers. mine, the y pipe did not line up correctly. just use a little elbow grease and you'll be good. after a heat cycle or two tighten down all the clamps again(unless you are going to weld) and you should be good.
