First Mod Woohoo!!
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Feb 2006
Posts: 1,370
Likes: 1
From: Allen Park, MI
First Mod Woohoo!! well i finally did my first mod, i got the Slp Cold Air Pack, and the Fast Toys Ram Air extension piece. getting the cold air pack and then the extension was the same price as the ram air kit, lid, filter but with the pack and the extension i basically got the smooth bellow for free.
Thanks to SpeedInc for the fast shipping and Fast Toys
Thanks to SpeedInc for the fast shipping and Fast Toys
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Feb 2006
Posts: 1,370
Likes: 1
From: Allen Park, MI
24k miles, i cleaned it up a little bit after i put the intake on, just so it didnt have a clean intake with a dirty engine.
i cant wait for the exhaust, so then people wont mistake my car for a v6 anymore with the exhaust (hopefully)
i cant wait for the exhaust, so then people wont mistake my car for a v6 anymore with the exhaust (hopefully)
Originally Posted by JDP
24k miles, i cleaned it up a little bit after i put the intake on, just so it didnt have a clean intake with a dirty engine.
i cant wait for the exhaust, so then people wont mistake my car for a v6 anymore with the exhaust (hopefully)
i cant wait for the exhaust, so then people wont mistake my car for a v6 anymore with the exhaust (hopefully)
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Feb 2006
Posts: 1,370
Likes: 1
From: Allen Park, MI
when i took my car to the track last wednesday, the guy at tech asked me if it was a 6 cylinder or 8, i giggled a little bit while saying it was an 8, then hes like "oh, well do you have a helmet then?"
Trending Topics
Originally Posted by JDP
when i took my car to the track last wednesday, the guy at tech asked me if it was a 6 cylinder or 8, i giggled a little bit while saying it was an 8, then hes like "oh, well do you have a helmet then?"
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Open up that exhaust, I felt a little differance then I installed a cutout (budget).I ran it with the FTRA and then again with the block off plate and I felt a definate differance.
Originally Posted by JDP
i got some jet-hots on the way, with o/r y-pipe, and im going to make a magnamouth exhaust.
then after that, who knows
then after that, who knows
I have a set of Jet Hot Lt's and a Mufflex ORY sitting in my living room. Just waiting on my O2 sims.
The JetHots are nice and that Mufflex ORY is a beast.
Pics are available if ya want to see em.
R/
Frat
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Feb 2006
Posts: 1,370
Likes: 1
From: Allen Park, MI
i did it by myself, and you need to cut some **** (which took the longest), but after everything was cut, it only took like 20 minutes to put on. everything is easy to do, you just have to measure where you cut everything.
Dude, this is like doin drugs, the more you do, the more you want. I ran 13.2's at the track by droppin in SLP cold pack, Magnaflow catbacks (which I love!!) and some other goodies listed below. I dropped headers and catted Y pipe in 2 weeks ago and my car is flyin now. Word to the wise for the future, invest in some Prothane motor mounts (50 bucks) before you do the header (Ceramic coated Pacesetter LT's)and Y pipe (TSP Catted Y with Magnaflow cats) thing. I had to do it as an afterthought because the headers and Y were bangin on the floorboard. I learned that this is more common than people want to believe. Prothanes are the cure to the disease!!
Hopefully after header and Y pipe I will be in the 12 sec. Club. Will see in May at the track.
AND THE CAR SAID: I NEED MORE DAMMIT!!
AND THE OWNER SAID: I NEED A SECOND JOB TO FEED THIS DAMM ADDICTION!
48 year old Z-28 speed junkie who still love stoplight action!!!
Have fun, be safe and enjoy your car. Check out under my hood with 70K miles on the car. Click link below.
Hopefully after header and Y pipe I will be in the 12 sec. Club. Will see in May at the track.
AND THE CAR SAID: I NEED MORE DAMMIT!!
AND THE OWNER SAID: I NEED A SECOND JOB TO FEED THIS DAMM ADDICTION!
48 year old Z-28 speed junkie who still love stoplight action!!!
Have fun, be safe and enjoy your car. Check out under my hood with 70K miles on the car. Click link below.
Thread Starter
TECH Fanatic
iTrader: (21)
Joined: Feb 2006
Posts: 1,370
Likes: 1
From: Allen Park, MI
Originally Posted by LANDONZ
where did you get the extension piece??
a sponsor -------->
well now i have 3 huge boxes in my living room conisisting of headers, y-pipe, and a cat-back
it is like a drug, ive modded nearly all of my cars ive had