Any Static/Interference with Weld On Subframe Connector's?
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 653
Likes: 0
Re: Any Static/Interference with Weld On Subframe Connector's? With my Kenny Brown's it was suggested to disconnect the negative battery cable. Also to have the car on a drive on lift so the chassis was loaded. They were installed in April of 2000 with no problems to date.
TECH Apprentice
Joined: Apr 2002
Posts: 373
Likes: 0
From: Hickory, NC
Re: Any Static/Interference with Weld On Subframe Connector's? Thanks, Wayne. I "loaded" the suspension when I installed my PHR and LCA's so I figured I would also need to do the same thing for the SFC's.
Anyone else have any issues related to "weld-in" SFC's?
Thanks Guys.
Anyone else have any issues related to "weld-in" SFC's?
Thanks Guys.
Thread Starter
TECH Enthusiast
Joined: Nov 2001
Posts: 653
Likes: 0
Re: Any Static/Interference with Weld On Subframe Connector's? Glad to help Trent. I meant to say they were installed in April 2001 not 2000. But, still no probs anyway. You'll also want to put some rust preventative on the welds. I used Extend from NAPA with no rust to date. Others have used POR-15.
TECH Apprentice
Joined: Apr 2002
Posts: 373
Likes: 0
From: Hickory, NC
Any Static/Interference with Weld On Subframe Connector's? I've got a friend who told me that I'll need to be careful when welding in sub connectors. I was told if it's not done right or not properly ground I could have some problems.
Is there any truth to this? I thought I could just call up Brett Rockey @ BMR and get'em ordered but I wanted to check here first.
Any positive or negative experiences?
Is there any truth to this? I thought I could just call up Brett Rockey @ BMR and get'em ordered but I wanted to check here first.
Any positive or negative experiences?
