borla plates?
borla plates? hey guys I tried putting it in the wanted section but not too sure how often it is browsed 
)
Im looking for the 1/4 open, 1/2 open, 3/4 open, and block of plate.
I have the wide open plate in, but when I mived, it seems I didnt bring my bag with the plates in it go figure.
I figure on inspection it may pass the sniffer if I block it off and force it to go through the muffler) Once i have the cam, and lt's put in. It'll have a catted y-pipe.
thanks
)Im looking for the 1/4 open, 1/2 open, 3/4 open, and block of plate.
I have the wide open plate in, but when I mived, it seems I didnt bring my bag with the plates in it
go figure.I figure on inspection it may pass the sniffer if I block it off and force it to go through the muffler
) Once i have the cam, and lt's put in. It'll have a catted y-pipe.thanks
How much would the angle grinder cost 
not all of us have nifty cool garages Mines fileld with golf carts, boxes and the like.. maybe one day I can actually get myhands dirty and get some of the fun toys to play with the car
not all of us have nifty cool garages
Mines fileld with golf carts, boxes and the like.. maybe one day I can actually get myhands dirty and get some of the fun toys to play with the car Trending Topics
Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
This is what you need right here buddy:
http://www.quicktimeperformance.com/...ct_detail&p=55
Fits right inside your Borla, I have it on my T/A and love it. Screw getting under the car getting them three bolts out and swapping plates. You just flip a switch and its open or closed.
Peace,
Craig.
http://www.quicktimeperformance.com/...ct_detail&p=55
Fits right inside your Borla, I have it on my T/A and love it. Screw getting under the car getting them three bolts out and swapping plates. You just flip a switch and its open or closed.
Peace,
Craig.
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Originally Posted by CRAGER
This is what you need right here buddy:
http://www.quicktimeperformance.com/...ct_detail&p=55
Fits right inside your Borla, I have it on my T/A and love it. Screw getting under the car getting them three bolts out and swapping plates. You just flip a switch and its open or closed.
Peace,
Craig.
http://www.quicktimeperformance.com/...ct_detail&p=55
Fits right inside your Borla, I have it on my T/A and love it. Screw getting under the car getting them three bolts out and swapping plates. You just flip a switch and its open or closed.
Peace,
Craig.
Didnt even know anyone made such a thing specifically for the borla CB. I am getting ready to start changing over plates until I find one that I like but.................might be getting this instead! Anyone use it? Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
Originally Posted by 99whitews6
Ok, wow Didnt even know anyone made such a thing specifically for the borla CB. I am getting ready to start changing over plates until I find one that I like but.................might be getting this instead! Anyone use it?
Didnt even know anyone made such a thing specifically for the borla CB. I am getting ready to start changing over plates until I find one that I like but.................might be getting this instead! Anyone use it?If you order one make sure you order the one made to fit inside Borla, it's the link I posted I believe. The blade size is smaller, small enough to spin inside a 3" Borla exhaust.
I've had Borla on about 3 of my f-body cars, and I wish I had this on all of them, very nice control over sound.
Peace,
Craig.
Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
Originally Posted by INMY01TA
Mehh. Screw the plates and Quetec. I run no plate all the time. Took it thru emissions a couple times w/headers, no cats, and a 224 cam.
It is nice to close it up and have some silence for a change.
But you are right about the emissions thing. If your area just hooks up to your computer, it does not matter then.
Peace,
Craig.
Originally Posted by CRAGER
Thats not for everybody, more so the guy who posted this thread. He wanted plates for his Borla.
It is nice to close it up and have some silence for a change.
But you are right about the emissions thing. If your area just hooks up to your computer, it does not matter then.
Peace,
Craig.
It is nice to close it up and have some silence for a change.
But you are right about the emissions thing. If your area just hooks up to your computer, it does not matter then.
Peace,
Craig.
I love the adjustibility of the Borla, and the tips. Underated imo. Administrator
Joined: Nov 2001
Posts: 29,404
Likes: 0
From: Houston, TX
Originally Posted by INMY01TA
...I love the adjustibility of the Borla, and the tips. Underated imo.
Peace,
Craig.
Its says the bolt-on cutout is adjustable. How can you tell if it is open say 2 inches vs the wide open and so on? Not sure if it is an all open or all closed thing.. or can you adjust it
Going back to the borla dyno sheet. http://www.ws6.com/mod-5.htm . it seems the 2.75 and 2.25 plates did better than the full plate or no plate. I didnt have a 1.5 inch plate.
I think I will put int he 2.75 plate so it'll hopefulyl still sound mean
Going back to the borla dyno sheet. http://www.ws6.com/mod-5.htm . it seems the 2.75 and 2.25 plates did better than the full plate or no plate. I didnt have a 1.5 inch plate.
I think I will put int he 2.75 plate so it'll hopefulyl still sound mean
