Puttering after LT install
Thread Starter
On The Tree
Joined: May 2002
Posts: 189
Likes: 0
From: Woodridge, IL
Puttering after LT install It started about a week after puttin the Hooker Lts in. It sounds like its comming from the engine compartment. I think its an exhaust leak, cause it is alwys there, but more noticable when i accelerate. How can i check to see where it is comming from? Also, if i want to go with a true dual system, how much would it cost to get the most RWHP out of a true dual system.
Staging Lane
Joined: Oct 2002
Posts: 67
Likes: 0
From: San Marcos/Coppell, TX
Re: Puttering after LT install If it's an exhaust leak, you'll see some blackened area around where it's leaking. Also, exhaust leaks generally get quieter as your engine warms up due to the metal expanding.
The same thing happened to me when I did my Hookers but it turned out my #8 plug was loose, causing air to escape everytime that cylinder fired. It made a really loud ticking noise.
If you changed your plugs, I'd check this.
<small>[ October 29, 2002, 04:27 PM: Message edited by: ZYouL8R ]</small>
The same thing happened to me when I did my Hookers but it turned out my #8 plug was loose, causing air to escape everytime that cylinder fired. It made a really loud ticking noise.
If you changed your plugs, I'd check this.
<small>[ October 29, 2002, 04:27 PM: Message edited by: ZYouL8R ]</small>
