What Guages To Use With N/A LS1?
What Guages To Use With N/A LS1? I have a dual guage pod, and I'm wondering what AutoMeter guages will do me the most good with my new n/a setup. I have a nice fuel PSI guage, what other one should I use?
tia,
tia,
Re: What Guages To Use With N/A LS1? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by BadBoyz:
<strong>Use the fuel to air ratio gauge. I just got that one couple of days ago.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Is that the one with the green to red flashing LED's? That one gets on my nerves a little bit at night.
I was thinking oil psi or water temp, but I don't want to waste money on one that really isn't going to help me out.
<strong>Use the fuel to air ratio gauge. I just got that one couple of days ago.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">Is that the one with the green to red flashing LED's? That one gets on my nerves a little bit at night.
I was thinking oil psi or water temp, but I don't want to waste money on one that really isn't going to help me out.
TECH Enthusiast
Joined: Feb 2002
Posts: 636
Likes: 0
From: HTownRacing.com, TX
Re: What Guages To Use With N/A LS1? honestly i think the air/fuel gauge is beneficial in the fact that if it is not moving as it should it is a postive indicator for insufficient switching on your front o2 sensor banks. i know with a strong N/A motor the exhaust can overwhelm these and dead o2's are never a good thing.
Re: What Guages To Use With N/A LS1? </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by redrumss:
<strong>Check out the speedshop.org Nitrous Digital Guages site to the right. Good Air/Fuel guage and EGT guages.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I use Speedshops A/F gauge.(reads in voltage like A-tap) Cyberdyne Fuel pressure and Water temp.
<strong>Check out the speedshop.org Nitrous Digital Guages site to the right. Good Air/Fuel guage and EGT guages.</strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">I use Speedshops A/F gauge.(reads in voltage like A-tap) Cyberdyne Fuel pressure and Water temp.
Launching!
Joined: Nov 2001
Posts: 238
Likes: 0
From: Milwaukee Area, WI
Re: What Guages To Use With N/A LS1? I would go with the oil temp gauge. Good indication of where your temps are all the time.
Up to temp for the springs and not too hot when really getting on it or racing it.
Up to temp for the springs and not too hot when really getting on it or racing it.
