Ordered a Hump Hpse...

Reply Subscribe

Thread Tools

Search this Thread

Oct 31, 2002 | 08:11 PM

MONGOOS

Thread Starter

TECH Enthusiast

Joined: May 2002

Posts: 504

Likes: 0

From: Tulsa and Claremore, OK

Ordered a Hump Hpse...

It's basically the SLP single rib bellows but only $13... anyway, for those of you who are using/have used it... does it need to be trimmed to fit? I tried installing it and it seems to be about a half inch or more too long... any tips?

Oct 31, 2002 | 08:27 PM

Z06PSI

TECH Addict

iTrader: (33)

Joined: Jul 2002

Posts: 2,647

Likes: 1

From: Thomson, GA

Re: Ordered a Hump Hpse...

Put you clamps around the hose get it where you want it trim a little off at a time. Use the clamps as a guide to make straight cuts.

Oct 31, 2002 | 08:31 PM

MONGOOS

Thread Starter

TECH Enthusiast

Joined: May 2002

Posts: 504

Likes: 0

From: Tulsa and Claremore, OK

Re: Ordered a Hump Hpse...

Thank you. <img border="0" title="" alt="[Big Grin]" src="gr_grin.gif" />

Nov 1, 2002 | 08:26 AM

redrumss1

Teching In

Joined: Aug 2002

Posts: 38

Likes: 0

From: Fort Gordon

Re: Ordered a Hump Hpse...

Oh and I used a regular carpet knife to trimm it.

Nov 1, 2002 | 10:12 AM

MONGOOS

Thread Starter

TECH Enthusiast

Joined: May 2002

Posts: 504

Likes: 0

From: Tulsa and Claremore, OK

Re: Ordered a Hump Hpse...

I wrestled with it for another hour today... just can't seem to get it cut correctly. Every time I get it popped onto the TB, it pops off the MAF... and vice versa... I guess I can't get the cut angled correctly... I gave up... tossed into my box full of stock parts along with the rest of my old/stock intake mods...

Reply Subscribe