slp LT install question
Thread Starter
Launching!
Joined: Apr 2002
Posts: 236
Likes: 0
slp LT install question Istalled LT's Y pipe&high flow cats on my 02 last wk end drove car all week car is running great. today i get ses. took it to auto zone their analizer says 02 sensor. i go home put car on ramps every thing looks fine no burnt sensor wires or anything like that. still car is running great I dont think an 02 sensor is bad but I have this light on my dash anybody else know anything about this.
TECH Fanatic
Joined: Nov 2001
Posts: 1,780
Likes: 7
From: Mi./Al.
Re: slp LT install question If AutoZone cleared your ses light and it hasn't come back I wouldn't worry about it, sometimes todays cars just throw a ses light to make us worry. If the light has come back on you probably have a bad 02, you never want to touch the end of a 02 when installing it.
Al
Al
TECH Enthusiast
Joined: Nov 2001
Posts: 712
Likes: 1
From: Dallas,Texas
Re: slp LT install question If you can double the protection on the
orange tube where it runs by the header..
like this http://www.ls1info.com/orangetube.jpg
Here is what it was like before I double'd the
protection.
http://ls1info.com/orngtube.jpg
I did not have anyproblems but wanted to make
sure..
orange tube where it runs by the header..
like this http://www.ls1info.com/orangetube.jpg
Here is what it was like before I double'd the
protection.
http://ls1info.com/orngtube.jpg
I did not have anyproblems but wanted to make
sure..
