LS2 intake + boost...
#1
TECH Fanatic
Thread Starter
iTrader: (5)
Join Date: Apr 2005
Location: san marcos, TX
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
LS2 intake + boost...
been thinking of switching to an LS2 intake(port matching it) and LS2 90mm throttle body when I build my new motor.. Wonder how that will do with boost compared to an LS6 intake and stock 78mm throttle body....Anyone tried it???
#4
TECH Junkie
iTrader: (1)
I chose the ls2 and have a 90,mm on my boosted TA... I find it simple...boost benifits from flow... this flows. I removed my FAST 90 for the more stock looking ls2.. I found no change... but i did not back to back dyno... blowing the tires off is blowing the tires off and Im not sure I would see even 25 hp change. I suspect there was no, or minimal loss...
#5
TECH Fanatic
Thread Starter
iTrader: (5)
Join Date: Apr 2005
Location: san marcos, TX
Posts: 1,014
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Jammer
I chose the ls2 and have a 90,mm on my boosted TA... I find it simple...boost benifits from flow... this flows. I removed my FAST 90 for the more stock looking ls2.. I found no change... but i did not back to back dyno... blowing the tires off is blowing the tires off and Im not sure I would see even 25 hp change. I suspect there was no, or minimal loss...
#6
the 90mm opening will help since its gonna be boosted it might come out above the ls6 just by a tad tho... if it were me on a boosted car i would go with a weiand intake and port the hell out of it since its aluminum.you could probably port the intake to a much bigger diameter too with the weiand and get an adapter so it will fit a NW TB.