Help! Quick!
Thread Starter
10 Second Club
iTrader: (16)
Joined: Jan 2006
Posts: 1,013
Likes: 1
From: Wichita Falls, TX
Help! Quick! I'm taking my intake manifold out to change my #2 knock sensor. Everything is disconnected except for the fuel line going to the fuel rail on the drivers side of the car. How do I disconnect this fuel line from the fuel rail?? 
Please help quick. I need to get it done and back together.
Please help quick. I need to get it done and back together. 
Get your self one of these tools which ever is most avable. Or you can leave it connected and fold it over on to the driver wheel well.
http://www.sjdiscounttools.com/vehic...ine-tools.html
http://www.sjdiscounttools.com/vehic...ine-tools.html
http://www.sjdiscounttools.com/otc7660.html
I got one that looks something like that from advance auto. It's a piece of crap but it has worked every time I needed it to. You just place it over the fuel line on the manifold side (after you shove that rubber grommet out of the way), then squeeze it closed and shove it inside the fuel fitting. Push the fuel line toward the rail while the tool is inside it, then yank it off.
I got one that looks something like that from advance auto. It's a piece of crap but it has worked every time I needed it to. You just place it over the fuel line on the manifold side (after you shove that rubber grommet out of the way), then squeeze it closed and shove it inside the fuel fitting. Push the fuel line toward the rail while the tool is inside it, then yank it off.
