Holley Intake
Re: Holley Intake most of the sponsors carry it on the right...
but i think its a waste of money... LS6 intake(399from SLP) serves the same purpose unless you need the holley for direct port n20?
but i think its a waste of money... LS6 intake(399from SLP) serves the same purpose unless you need the holley for direct port n20?
Re: Holley Intake I was looking for one a few weeks ago, and ended up making one. Someone does have them, I just can't remember who (sponsor here). Do a search for my user number in the sponsor section. May find my post from a few weeks back.
Re: Holley Intake 98TAauto: I'm planning on porting it pretty big to go with a large port on my heads for a 409ci block but I have taken off ALL the egr stuff, that's why I need some sort of block off plate for the egr opening on the Holley Intake. Thanks though.
Reckless: I'll try that thanks.
Reckless: I'll try that thanks.
Re: Holley Intake You can make one very easily. Get some 1/8" or so flat steel plate at the hardware store, cut it to size, drill a hole for the bolt. You will have to use some RTV to make it seal.
I have one on my stock intake I made that I will give you if you are in the Houston area and can come get it.
<small>[ February 15, 2003, 08:37 AM: Message edited by: Larry ]</small>
I have one on my stock intake I made that I will give you if you are in the Houston area and can come get it.
<small>[ February 15, 2003, 08:37 AM: Message edited by: Larry ]</small>
