boltons
Re: boltons Exhaust (headers,y-pipe,true duals,etc)
!Free Mods
Pulley
A4 - TQ Converter
M6 - clutch
drive shaft
TQ-arm
rear end
suspension (shocks,springs,LCA,SFC,k-memeber,etc)
throttle body
MAF
bellows
lid
filter
weight reduction
Intake (LS6)
drag wheels with good hookin tires
ram air (home made,FTRA,supersucker,etc)
Basicly anything that will help your car perform better without going into the engine (heads, cam, pistons, etc.)
If I am missing anything I am sure someone else will chime in here.
Lynda
!Free Mods
Pulley
A4 - TQ Converter
M6 - clutch
drive shaft
TQ-arm
rear end
suspension (shocks,springs,LCA,SFC,k-memeber,etc)
throttle body
MAF
bellows
lid
filter
weight reduction
Intake (LS6)
drag wheels with good hookin tires
ram air (home made,FTRA,supersucker,etc)
Basicly anything that will help your car perform better without going into the engine (heads, cam, pistons, etc.)
If I am missing anything I am sure someone else will chime in here.
Lynda
TECH Enthusiast
Joined: Jan 2002
Posts: 559
Likes: 0
From: West Monore
Re: boltons Friend, free mods are modications made to your car to your car that are free and cost very little to do such as weight reduction, cutting out the bottom of your air box for more air, the throttle body by-pass, and power steering belt bypass to free horsepower for drag racing. Read the board for more information and ask questions. See LS1.com for more information. Cheers. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
TECH Enthusiast
Joined: Jan 2002
Posts: 559
Likes: 0
From: West Monore
Re: boltons Friend, free mods are modications made to your car that are free and cost very little to do such as weight reduction, cutting out the bottom of your air box for more air, the throttle body by-pass, and power steering belt bypass to free horsepower for drag racing. Read the board for more information and ask questions. See LS1.com for more information. Cheers. <img border="0" title="" alt="[Smile]" src="gr_stretch.gif" />
<small>[ March 04, 2003, 09:20 PM: Message edited by: kent ]</small>
<small>[ March 04, 2003, 09:20 PM: Message edited by: kent ]</small>
Re: boltons http://www.installuniversity.com
click on "Install Documents" to the left. Lots of information.
Hope this is what you are looking for.
Good Luck!
Lynda
click on "Install Documents" to the left. Lots of information.
Hope this is what you are looking for.
Good Luck!
Lynda
Trending Topics
Re: boltons a B&M short throw, HPP3/MAFT/LS1edit?
i duno if those are bolton's.
are blowers and Nitrous bolt ons? <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
i duno if those are bolton's.
are blowers and Nitrous bolt ons? <img border="0" alt="[evil]" title="" src="graemlins/gr_devil.gif" />
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei