Cool C5 Throttle body

Reply Subscribe

Thread Tools

Search this Thread

Mar 13, 2003 | 06:27 PM

Jantzer98SS

Thread Starter

Banned

iTrader: (54)

Joined: Nov 2001

Posts: 1,816

Likes: 0

From: Grants Pass, OR

Cool C5 Throttle body

The 70mm ridge is removed and contoured for exception flow, the front throttle shaft is cut off and blade screws shortened, the entrance is streamlined, the exit is blended for a smooth transition out of the TB, and the newest update..... the PCV hole that is epoxied now has a rectangular section of tubing set in the epoxy at the very top of the TB instead of a drilled hole, resulting in less turbulence, more flow, and greater consistency.

Looks are killer too! The casting flash and lines on the TB housing are smoothed before powdercoat and the housing on the side that mounts the electric motor is polished to a mirror finish. Price is $180 shipped with a swift 3 day turnaround. Pics.....

http://community.webshots.com/photo/...66342193eRDKnh
http://community.webshots.com/photo/...66342174WSJLfc
http://community.webshots.com/photo/...66342216dzgflu

Feel free to drop me an email if you're interested or have any questions.

jantzerperformance@hotmail.com

Reply Subscribe