1/4 time?
B1 cam
Hooker lts with ory
Borla catback
computer tuning
asp crank pulley
slp lid
SSRA {ram air}
ported maf ends with bellows
slp subframe connectors
strut tower bar
Thanks, John
<strong> Do you think adding the 4.10's that i will be adding next week will help my times? </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">You might want to investigate the 4.10s more. With your mods you will be running pretty fast though the lights. I saw you have a cam and you might have raised your rev limiter but you might want to give a hard look at 3.73s.
I have run out of rpm with my 4.10s and the only mods I have are-lid, SLP Mass Air, U.D. Pulley and a few free mods. I'm up to 112mph, much more and I'll be looking for 28 inch tires.
With your mods, I would think you would be running at least 115mph{most likely a good bit better} depending on were your track is.





