QTPs
Thread Starter
Staging Lane
Joined: Aug 2004
Posts: 50
Likes: 0
From: VA
QTPs Well I finally got my QTP's installed after waiting 2 months to get them. The drivers side went in like butter. The passenger side hit the K member though, so I had take the grinder to the K member. The install was pretty straight forward other than the Y pipe. It was a pain in the *** and even after alot of adjusting I still dont have much ground clearance. I guess im gonna have to get back under there and keep adjusting it. The best thing is I dont have a catback on the car yet so its just open Y pipe and it is insanely loud! This thing fu**n screams! 
Sounds like a worth while investment. That thang sounds like a full blown dragster. Me and Dave could hear you 2 miles away!! 
How bout that poor shmuck that helped you all day long. I feel sorry for him. J/k, thanks again for helping me with my tranny install a month ago.
How bout that poor shmuck that helped you all day long. I feel sorry for him. J/k, thanks again for helping me with my tranny install a month ago. The headers are awesome, the y pipe sucks. Ground clearance is terrible even on a stock ride height car. Can't imagine if it was lowered.
Also, my y pipe would not slip on the header collectors. Had to use a hacksaw and exhaust pipe expander to get it on, and then of course it leaks like crazy. I am going to just have an exhaust shop fix it up right.
It baffles me that QTP can make kick-*** headers, but a POS y pipe.
Also, my y pipe would not slip on the header collectors. Had to use a hacksaw and exhaust pipe expander to get it on, and then of course it leaks like crazy. I am going to just have an exhaust shop fix it up right.
It baffles me that QTP can make kick-*** headers, but a POS y pipe.
Thread Starter
Staging Lane
Joined: Aug 2004
Posts: 50
Likes: 0
From: VA
Yeah my y pipe wouldnt go on the collector either so we cut an extra slot in the y and and just beat it on there. It is a shame that the y pipe is such a piece of ****. Someone should market a quality made y that mates up to the flowmaster merge and fits qtps, they would sell a ton. But it was nice when i opened the hood this morning and the headers where all gold and purple! Looks bad ***!
yeah i just got mine put on, i got borla i actually like the sound.... but as for the y-pipe i can maybe fit three fingers inbetween the floor and the ypipe.. it so damn low i have to put 2x4 and plywood under the back tires to get it in the garage.. and it also scraps on every lil bump.. not even gonna try to go over speed bumbs.. my car is lowered too so i dunno what the hell i gonna do with it the clearance is ****...
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Gifts Neither Your Dad Nor Grad Will Shove Into the 'Trinket Drawer'
Brett Foote
Topdon ONE vs. Artidiag 800 BT2: Which is the Diagnostic Tablet For You?
Pouria Savadkouei
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei