Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

SLP Lid Breather Tube and Filter?

Thread Tools
 
Search this Thread
 
Old Jul 19, 2006 | 09:32 AM
  #1  
DefelRadar's Avatar
Thread Starter
Teching In
 
Joined: May 2006
Posts: 6
Likes: 0
Default SLP Lid Breather Tube and Filter?

is the breather tube and filter needed for an 02 with a lid or can you do without and just throw any lid on it?

Thanks!
Reply
Old Jul 19, 2006 | 09:52 AM
  #2  
daryl2cb@yahoo.com's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Jul 2004
Posts: 1,882
Likes: 0
From: Greensburg,PA
Default

delete the air pump and any lid will be fine.
Reply
Old Jul 19, 2006 | 10:59 AM
  #3  
TheBlurLS1's Avatar
That's what she said...
iTrader: (8)
 
Joined: Mar 2004
Posts: 7,954
Likes: 2
From: Nederland Texas
Default

Throw any lid on it and get a small filter from the ricer section at the autoparts store. If you delete the AIR pump later, you won't need to worry about plugging the hole in your lid.

Do a search next time, you'll find your answer faster than you can type that message out.
Reply




All times are GMT -5. The time now is 12:17 AM.