Generation III External Engine LS1 | LS6 | Bolt-Ons | Intakes | Exhaust | Ignition | Accessories
Sponsored by:
Sponsored by:

Help! Accidentally put oil in Power steering

Old Aug 2, 2006 | 03:16 PM
  #1  
tom30ta's Avatar
Thread Starter
Teching In
iTrader: (1)
 
Joined: Jan 2003
Posts: 12
Likes: 0
From: chitown
Default Help! Accidentally put oil in Power steering

As I was putting things back together after a head swap I mistakened a quart of oil for a quart of power steering fluid(it was late and I was tired). I knew what I did right away so I took of the power steering resevoir and drained it. I never started the car so the oil was never circulated through the power steering system. How bad is it if there would be allittle oil in the system? What should I do?
Reply
Old Aug 2, 2006 | 04:13 PM
  #2  
Hoss Ghoul's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: May 2004
Posts: 679
Likes: 0
From: East Bay, Ca
Default

I would think the best thing to do is to run it with PS fluid, let it circulate then drain all the fluid again, maybe do that twice to get all the oil out.

I don't think it will hurt anything if you do that. Having a little oil in the system might reduce the hydraulic effect of the system in the interim.
Reply
Old Aug 2, 2006 | 04:27 PM
  #3  
Hoss Ghoul's Avatar
TECH Enthusiast
iTrader: (2)
 
Joined: May 2004
Posts: 679
Likes: 0
From: East Bay, Ca
Default

http://www.cartalk.com/content/colum...vember/04.html
Reply
Old Aug 2, 2006 | 04:41 PM
  #4  
NHRAMAN's Avatar
TECH Senior Member
iTrader: (1)
 
Joined: Apr 2005
Posts: 8,807
Likes: 0
From: Vancouver,[KITSILANO].B.C. Canada *WestCoast*
Exclamation

Your car is gonna blow-up............. ....like he said..run ps fluid through a couple times and I would imabine it will be just fine..
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 09:12 AM.