Next mod ?
08-14-2006, 11:21 PM
#1
Teching In
Thread Starter
Join Date: Jul 2006
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
Next mod ? Hi all
I'm thinking on getting the 80mm BBK throttlebody for my 00' z28. My current modifications are: SLP lid, SLP CAI, SLP bellows, and a loud mouth exhaust. What do you think about this mod ? I'm thinking about getting a MAF soon after and stopping with the performance.. for now.
Do you think the 80mm is too big ? thanks in advance
I'm thinking on getting the 80mm BBK throttlebody for my 00' z28. My current modifications are: SLP lid, SLP CAI, SLP bellows, and a loud mouth exhaust. What do you think about this mod ? I'm thinking about getting a MAF soon after and stopping with the performance.. for now.
Do you think the 80mm is too big ? thanks in advance
08-14-2006, 11:41 PM
#2
TECH Fanatic
iTrader: (18)
Join Date: Oct 2004
Location: Clifton, NJ
Posts: 1,091
Likes: 0
Received 0 Likes
on
0 Posts
save your money by gettting your stock TB ported by NEW ERA...they're a sponsor. You ship your TB out to them, they work their magic the day they receive it and then promptly send it back to you...all for 75 bucks
the 80mm BBK just isn't worth it
i also wouldn't get an 85mm MAF if you are planning on doing any other modifications to the car at a future date...it will make tuning a bitch - unless you are putting out over 500hp, your MAF is not a restriction
the 80mm BBK just isn't worth it
i also wouldn't get an 85mm MAF if you are planning on doing any other modifications to the car at a future date...it will make tuning a bitch - unless you are putting out over 500hp, your MAF is not a restriction
08-15-2006, 03:36 AM
#3
Port your stock TB or buy a ported one from one of the sponsors.
Porting instructions are located here:
https://ls1tech.com/forums/showthrea...5&page=2&pp=20
Porting instructions are located here:
https://ls1tech.com/forums/showthrea...5&page=2&pp=20
08-15-2006, 10:53 AM
#6
Teching In
Thread Starter
Join Date: Jul 2006
Posts: 45
Likes: 0
Received 0 Likes
on
0 Posts
just curious but what is the difference between the ls6 intake manifold and my stock 2000 ls1 intake ? is it bigger ? is there a big difference between the two and are the gains worth the money? thanks again
08-17-2006, 10:37 PM
#7
Originally Posted by jinxeng
just curious but what is the difference between the ls6 intake manifold and my stock 2000 ls1 intake ? is it bigger ? is there a big difference between the two and are the gains worth the money? thanks again
Yeah man..... Plenty of info on here on the differences. The LS6 intake that came on 01-02 F-body's will be a good gain and cost you around $300 from someone used.
Chris