Broken Exhaust Manifold Bolts
Broken Exhaust Manifold Bolts I am replacing the cats in my 99 C5. So instead of trying to cut the pipes still on the car, i figured it would be much easier to remove the H-pipe assembly and cut it that way. Well its the whole assembly from the bottom of the stock exhaust mainfolds to the end of the torque tube where my borla exhaust begins. The problem is that i broke 2 of the 6 bolts (due to rust) at the end of the exhaust manifolds. They broke off flush to the h-pipe flange, but not to the manifold flange (still have a inch of bolt to grab).
My question: (about time huh?) Is it possible to unsrew the bolts from the manifold? I have it sitting there with liquid wrench on it right now. Which way should i turn them (are the reverse thread or normal)? What part number should i use to replace them?
Thanks for your help guys!
My question: (about time huh?) Is it possible to unsrew the bolts from the manifold? I have it sitting there with liquid wrench on it right now. Which way should i turn them (are the reverse thread or normal)? What part number should i use to replace them?
Thanks for your help guys!
